Peugeot Bipper recalls
Recalls to 31 Oct 2026, from DVSA's file. Each recall shows its own launch date.
DVSA lists 5 safety recalls naming the Peugeot Bipper, launched from 2010 to 2013. Most recalls cover only cars built in certain dates or chassis number ranges, so check a specific car on GOV.UK's recall check.
Peugeot Bipper recalls at a glance
- Recalls
- 5
- 2010 to 2013
- Latest recall
- 4 October 2013
- R/2013/107
Source: DVSA RecallsFile.csv, recalls launched from 1992 to October 2026, downloaded 31 October 2026. Open Government Licence v3.0.
Every Peugeot Bipper recall
Newest first. The concern is the part or system affected, the defect is what can go wrong, and the remedy is what the manufacturer does to put it right.
INABILITY TO CHANGE GEAR
R/2013/107, launched 4 October 2013, 428 vehicles affected across the models it covers
Defect: Over time partial wear of the gearbox control harnesses may occur due to contact with surrounding components. Gear selection may be affected as a result of electrical faults in some rare cases including the lighting of the warning lamp on the instrument panel and the driveability of the vehicle may be compromised.
Remedy: Recall the vehicles that are likely to be affected to check the condition of the gearbox control harness and where necessary fit additional protection.
BRAKING ASSISTANCE MAY BE REDUCED
R/2013/003, launched 16 January 2013, 78 vehicles affected across the models it covers
Defect: One of the vacuum hose unions in the braking system may not be to specification. This could cause a reduction in braking assistance.
Remedy: Check and if necessary replace the hose.
ENGINE MAY FAIL
R/2012/135, launched 13 November 2012, 1,851 vehicles affected across the models it covers. Also covers the 107, 206, 207
Defect: It is possible that the con-rod bearing shells will not conform to manufacturer specification. This could lead to premature deterioration of the shells and in time cause the engine to fail.
Remedy: To replace the con-rod bearing shells
REAR CROSS MEMBER MAY CRACK
R/2012/098, launched 22 October 2012, 6,192 vehicles affected across the models it covers
Defect: Over a period of time a small crack can appear on the rear axle cross member particularly under conditions of repeated maximum suspension travel. The small crack could increase in size and eventually lead to the rear wheel rubbing on the wheel arch.
Remedy: Replace the rear axle cross member and suspension bump stops.
ENGINE MAY FAIL
R/2010/186, launched 4 November 2010, 132 vehicles affected across the models it covers. Also covers the 207
Defect: There may be a fault in the machining of the crankshaft that could lead to a lubrication problem which overtime could lead to the engine seizing.
Remedy: The recalled vehicles will have the engine replaced.
Source: DVSA RecallsFile.csv, recalls launched from 1992 to October 2026, downloaded 31 October 2026. Open Government Licence v3.0.
What to do next
If you own a Peugeot Bipper, check its registration on GOV.UK and ask a Peugeot dealer whether any recall work is outstanding. If you are buying one, ask the seller for proof the work was done, and run a Motoring Insider history check for finance, write-offs and the MOT history.