SEAT Ateca recalls
Recalls to 31 Oct 2026, from DVSA's file. Each recall shows its own launch date.
DVSA lists 12 safety recalls naming the SEAT Ateca, launched from 2017 to 2026. Most recalls cover only cars built in certain dates or chassis number ranges, so check a specific car on GOV.UK's recall check.
SEAT Ateca recalls at a glance
- Recalls
- 12
- 2017 to 2026
- Latest recall
- 16 October 2026
- R/2026/362
Source: DVSA RecallsFile.csv, recalls launched from 1992 to October 2026, downloaded 31 October 2026. Open Government Licence v3.0.
Every SEAT Ateca recall
Newest first. The concern is the part or system affected, the defect is what can go wrong, and the remedy is what the manufacturer does to put it right.
48T7 - Steering housing bolt Ateca and Tarraco
R/2026/362, launched 16 October 2026. Also covers the Tarraco
Defect: SEAT S.A. has identified that in vehicles manufactured during a specific production period there is a possibility that moisture ingress may cause corrosion of a steering mounting bolt. If this corrosion progresses the steering attachment may become compromised. This could ultimately lead to a loss of steering control and increase the risk of an accident.
Remedy: In affected vehicles this steering mounting bolt will be replaced with a bolt featuring enhanced corrosion resistance. If you notice unusual metallic rattling noises coming from the front axle area or any irregularities while steering you must not continue driving the vehicle. Park the vehicle safely and contact an authorised SEAT Service Partner immediately.
Front driver airbag replacement
R/2023/273, launched 11 September 2023. Also covers the Alhambra, Ibiza, Leon, Toledo
Defect: In vehicles produced in a specific period with airbags from manufacturer Takata in the event of an accident with airbag activation the driver airbag gas generator housing may explode.
Remedy: Inspect the driver’s airbag and replace it if necessary.
ENGINE DESIGN COVERS COULD DETACH FROM THEIR FIXING
R/2022/076, launched 23 March 2022, 2,309 vehicles affected across the models it covers. Also covers the Formentor, Leon, Tarraco
Defect: In some vehicles within the range of specified VINs it is possible that they have engine design covers installed that could detach from their fixing depending on use (very sporty driving or poor road conditions) and the operating time.
Remedy: The engine design cover must be removed on all affected vehicles.
POSSIBLE FAULT IN A TURN SIGNAL
R/2019/356, launched 14 October 2019, 23,732 vehicles affected across the models it covers. Also covers the Leon
Defect: In the event of a turn signal (indicator) fault the driver may not realise
Remedy: Reprogram the on-board network control unit
AT LOW ENGINE SPEEDS THE ENGINE PRODUCES INSUFFICIENT TORQUE
R/2019/305, launched 9 September 2019, 2,042 vehicles affected across the models it covers. Also covers the Tarraco
Defect: Too little torque may be provided by the engine at low engine speeds.
Remedy: On the affected vehicles the software of the engine control unit must be updated.
CRACKS IN THE RIGHT SIDE OF THE SEAT FRAME/PAN
R/2019/230, launched 17 July 2019, 122 vehicles affected across the models it covers. Also covers the Tarraco
Defect: There is a possibility that due to a manufacturing error there is a crack on the frame of the left front seat.
Remedy: Check and replace the seat frame if a crack is found.
THE DRIVER'S AIR BAG MAY NOT INFLATE FAST ENOUGH IN THE EVENT OF ACTIVATION
R/2019/157, launched 13 May 2019, 50 vehicles affected across the models it covers. Also covers the Arona, Ibiza, Leon, Toledo
Defect: Drivers air bag may not inflate at the correct rate.
Remedy: Replace the drivers front air bag.
INTERNAL SAFETY PINS MAY BE MISSING FROM THE REAR SEAT CENTRE HEADREST
R/2019/078, launched 6 March 2019, 2,477 vehicles affected across the models it covers
Defect: The centre rear head restraint may not be to specification.
Remedy: Check the head restraint and replace if necessary.
POSSIBLE DEVIATIONS IN A WELD IN THE REAR SEATS
R/2018/353, launched 12 December 2018, 2 vehicles affected across the models it covers
Defect: The rear back rest head restraint mounting is not correctly welded.
Remedy: Check and replace rear back rest frame if required.
ELECTRIC PARKING BRAKE CAN BE UNINTENTIONALLY RELEASED WHEN DISENGAGING THE CLUTCH PEDAL
R/2018/313, launched 13 November 2018, 4,243 vehicles affected across the models it covers
Defect: The electro-mechanical park brake may be released inappropriately.
Remedy: The software for the brake control will be updated.
THE INCLINATION OF THE LEFT HEADLIGHT MAY BE ADJUSTED AT AN INCORRECT ANGLE
R/2018/312, launched 12 November 2018, 2,290 vehicles affected across the models it covers
Defect: An incorrect inclination angle of the headlights can dazzle other road users.
Remedy: The software of the headlight control unit must be updated.
REAR WHEEL BEARING HOUSINGS MAY FAIL
R/2017/304, launched 17 November 2017, 4 vehicles affected across the models it covers
Defect: It is possible the tempering process for the rear wheel bearing housing was not correct. This could allow the housing to crack and fail
Remedy: On affected vehicles replace the bearing housing with a correctly manufactured version.
Source: DVSA RecallsFile.csv, recalls launched from 1992 to October 2026, downloaded 31 October 2026. Open Government Licence v3.0.
What to do next
If you own a SEAT Ateca, check its registration on GOV.UK and ask a SEAT dealer whether any recall work is outstanding. If you are buying one, ask the seller for proof the work was done, and run a Motoring Insider history check for finance, write-offs and the MOT history.